These extendable sway bar links have been designed for those customers who require a sway bar link longer and stronger than standard to suit a 2-3" suspension lift.
These links have the same mounting principle as a genuine Nissan sway bar link. The Heavy duty ball joints are sealed to stop contaminants getting in.
The links are adjustable between a minimum of 35mm longer than a standard link and maximum of 55mm longer than a standard item,.
Please take care to carefully set the length correctly. The sway bar must be long enough, thus not limiting downward travel, whilst being short enough to allow full suspension compression.
Once you have your adjustment set correctly, please use a drop of locktite (or similar) to lock the locking nut into place.
NOTE: when installing these to your vehicle, please ensure you have 15mm of thread at a minimum inside the rod for strength.
Supplied with new washers, new nyloc nuts and new link rubber bushes ready for installation to your vehicle as pictured.
This listing is for a SET of Links ( 4 ) and includes the Sway Bar Bracket you require inorder to remove the sway bar disconnect unit from the vehicle and replace with a standard sway bar link.
Please see our other listings in the store for other links and kits available.
This is a quality product that has not been manufactured in China.
Note: The sway bar bracket may come in Zinc or Black Powdercoat. It will come with what is currently in stock at the time.