Heavy Duty Front Adjustable Panhard Rod Suits Nissan Patrol GQ Y60 & GU Y61
Part Number: A-ZP5004
Heavy Duty Panhard Rod
Front Adjustable Panhard rod Made of 30mm O/D Solid Bar.
Suits: ALL Coil Sprung Nissan GQ Y60 Patrols
Suits: Nissan Patrol GU Wagon up to Series 2, 4/2000 & Suits GU Utes
The Difference between the Early and the Late models is the size of the bush at the Chassis end.
If the Bushes are the same size at both ends then it is an early Arm,
If the Bush at the Chassis end is Obviously Larger then it is the Later type of arm.
These Panhards have the Fine Pitch Thread, Which helps to stop them from rattling loose on corrugations etc.
They are Also fitted with Rubber Bushes NOT Urethane Bushes.
It is recommended to fit an adjustable Panhard rod to a car lifted over 2"
As you lift the car, the panhard rod Effectively becomes shorter, this Pulls the Axle Housing to one side,.
By fitting an adjustable Panhard rod you can centralize the Diff Housing back into the middle of the car.
They are easy to fit with basic Mechanical aptitude and a few Tools.
**NOTE: Suit Right Hand Drive Vehicles Only
The front panhard rod comes with the steering damper bracket & Panhard rod washer but is not pictured.
UPDATE: This now features a newer style bush as the older style bushes on some occasions with lifted vehicles appeared to 'walk out' of the panhard rod. Roadsafe has designed a new high quality rubber bushing to suit this application. Featureing a solid shell design found in other OE applications providing full surface area contact with the panhard bushing apertures, the rubber is now bonded into position to adsorb side loads at varied lift heights, aiding to minimise the 'walking' effect.
to add your review.